ColdFusion and Amazon SQS

Last updated on Jan 13, 2022

Overview

Message queues allow different components of a system to asynchronously communicate between the various components. A message queue provides a buffer that stores messages temporarily and provides endpoints for the components to connect to the queue and send messages. The message can be requests, replies, or error messages.

A message is usually stored in the queue until another service consumes the message and performs some operation.

Amazon Simple Queue Service (SQS) is a queueing service that stores messages that applications or microservices use. Amazon SQS help decouple system components, reduce dependencies, and provides scalability. The reason behind decoupling components is to build the system such that if any single component of the system were to become unresponsive for some reason, the other components would continue to work as usual.

SQS provides an implementation of message queuing software in the cloud. It provides a distributed system for passing messages between computers and application components. Message queues also provide a manner in which systems and components within systems can remain independent and autonomous.

With SQS, the system components use queue buffers to send messages to one another. These queues allow the components to communicate asynchronously, to support concurrency, to remain highly available, and to better handle load and spikes.

Get started

Install awssqs package

Adobe ColdFusion (2021 release) is modularized, if you are only using the ZIP installer. By default, the module for AWS SQS is not installed. The first step is to install the SQS package in ColdFusion.

Note: If you are using the GUI installer, the packages are pre-installed.

The package for SQS is called awssqs.

To install the package awssqs, use the Package Manager page in the ColdFusion Administrator, or follow the steps below:

Navigate to <CF_HOME>/cfusion/bin.
Enter the command:
- Windows: cfpm.bat
- Linux: cfpm.sh
Enter the command, install awssqs.

Wait for the AWS SQS package to get installed.

For more information, see ColdFusion Package Manager.

Get credentials to access AWS SQS

When you interact with AWS, you specify your AWS security credentials to verify your credentials and check whether you have permission to access the resources that you are requesting.

AWS uses the security credentials to authenticate and authorize your requests.

You must get the AWS Access Key ID and the AWS Secret Access Key. For more information, see Access Keys.

Add cloud service credentials and configuration

In ColdFusion (2021 release), there is a method getCloudService() that gives you a handle to create objects for accessing various cloud services.

The syntax of the service handle is as follows:

service=getCloudService(cloudCred,cloudConfig), where:

cloudCred: Defines the credentials for the cloud service. It could either be a struct or a string (also known as credential alias).
cloudConfig: Defines the cloud service configuration details. It could either be a struct or a string (also known as config alias).

After you've acquired the AWS credentials, you must declare these credentials in one of the following ways. Only then you can use these credentials to create a SQS object, after which you can use the object to make calls to the various SQS methods.

ColdFusion Administrator

Set credentials

In the ColdFusion Administrator, click Data & Services > Cloud Credentials.

An alias is a named representation of a cloud service and its configuration details. You can set the config alias through ColdFusion Administrator.

After entering the details, click Add Credential.

Set configuration options

In the ColdFusion Administrator, click Data & Services > Cloud Configuration.

Enter the following details, like configuration Alias, Vendor, and the name of the service.

After adding the configuration options, you may need to add a few more options. You can do so in the next screen. The following are a few options that you may need to add:

Request config
Client config
Proxy settings
Retry policy
Retry conditions

For more information, see Cloud configuration options.

Create the object

Once you've created the aliases for SQS credential and configuration options, you can create the object by using the getCloudService API, and include the following in your CFM.

sqsObject= getCloudService("sqsCred", "sqsConf")

Application.cfc

You can specify the SQS credentials and configuration options in Application.cfc. For example,

component 
{  
    this.name="AWS_STD_Queue"; 
    void function onApplicationStart(){ 
        application.awsCred  = { 
                                "alias" : "aws_std_queue", 
                                "vendorName" : "AWS", 
                                "region" : "us-east-1", 
                                "secretAccessKey" : "xxxxxxxxxxxxxxxxx", 
                                "accessKeyId" : "xxxxxxxxxxxxxxxx" 
                             } 
             
        application.snsConf  = { 
                                "serviceName" : "SNS" 
                             } 
 
        application.sqsConf ={ 
                                 "serviceName" : "SQS" 
                             }         
 
    } 
}

Create the object

sqsObject = getCloudService(application.awsCred, application.sqsConf)

On CFM page

On a CFM page, you can specify the SQS credentials and configuration options in one of the four methods, specified below:

Credential alias and configuration alias

After you've created the aliases for SQS credential and configuration options, you can use these aliases in the getCloudService
handle as shown below:

<cfscript> 
  // define the credential and the configuration aliases in the ColdFusion Admin 
  sqs=getCloudService("awsCred","sqsConf") 
  // code below. 
  ........... 
</cfscript>

Credential Alias and Struct for configuration options

<cfscript> 
    // Using credential alias and struct for service config 
    sqsConf = { 
            "alias":"sqsConf", 
            "serviceName" : "SQS", 
            "clientOverrideConfig":{ 
                "retryPolicy":{ 
                  "numRetries":4 
                } 
            }, 
            "httpClientConfig":{ 
                "maxConnections":50 
            } 
  
    } 
    sqs= getCloudService("sqsCred", sqsConf) 
  
    // code below 
    ..................... 
</cfscript>

Configuration alias and struct for credentials

<cfscript> 
    // Using config alias and struct for service credentials 
    // sqs credentials 
    sqsCreds={ 
      "vendorName":"AWS", 
      "alias": "sqsCred", 
      "region":"us-east-2", 
      "accessKeyId": "access key", 
      "secretAccessKey": "secret access" 
    } 
    sqs= getCloudService(sqsCreds, "sqsConf") 
    // code below 
    ..................................... 
</cfscript>

Structs for both credential and configuration options

<cfscript> 
  // Using Structs for both cloud credential and config 
  sqsCred={ 
    "vendorName":"AWS", 
    "alias": "sqs_cred_alias", 
    "region":"us-east-2", 
    "accessKeyId": "access key", 
    "secretAccessKey": "secret access key" 
  } 
  
  sqsConf = { 
          "alias":"sqs_conf_alias", 
          "serviceName" : "SQS", 
          "clientOverrideConfig":{ 
              "retryPolicy":{ 
                "numRetries":4 
              } 
          }, 
          "httpClientConfig":{ 
              "maxConnections":50 
          } 
  
  } 
  sqs = getCloudService(sqsCred, sqsConf ) 
  
  // code below 
  ................................................................... 
</cfscript>

Admin API

You can also add SQS credentials and configuration options by using the Admin APIs. The methods to add credentials and configuration are available in cloud.cfc.

The examples below demonstrate the usage of the methods addCredential(struct credential) and addServiceConfig(struct config).

Add credentials

<cfscript> 
  // Create an object of administrator component and call the login method 
  adminObj = createObject("component","cfide.adminapi.administrator") 
  adminObj.login("admin") 
  
  // Create an object of cloud component 
  cloudObj = createObject("component","cfide.adminapi.cloud") 
  
  // define credentials struct 
  credentialStruct={ 
    "alias" : "CredSQS", 
    "vendorName" : "AWS", 
    "region" : "us-east-2", 
    "secretAccessKey" : "secret access key", 
    "accessKeyId" : "access key" 
  } 
  
  // add credential credentialStruct 
  try{ 
    cloudObj.addCredential(credentialStruct) 
    writeOutput("Credentials added successfully") 
  } 
  catch(any e){ 
      writeDump(e) 
  } 
</cfscript>

Add configuration

<cfscript> 
  // Create an object of administrator component and call the login method 
  adminObj = createObject("component","cfide.adminapi.administrator") 
  adminObj.login("admin") 
  
  // Create an object of cloud component 
  cloudObj = createObject("component","cfide.adminapi.cloud") 
  
  // define configuration struct 
  configStruct={ 
      "alias":"ConfSQS", 
      "serviceName":"SQS", 
      "clientOverrideConfig":{ 
          "retryPolicy":{ 
              "numRetries":4 
          } 
      }, 
      "httpClientConfig":{ 
          "maxConnections":50 
      } 
  } 
  
  // add config configStruct 
  try{ 
    cloudObj.addServiceConfig(configStruct) 
    writeOutput("Configuration service added successfully") 
  } 
  catch(any e){ 
    writeDump(e) 
  } 
</cfscript>

CFSetup

You can also set up SQS credential and configuration via the CFSetup configuration utility.

Add cloud credential

add cloudcredential credentialAlias=sqscred accesskeyid=<access> secretaccesskey=<secret> region=ap-southeast-1 vendorname=AWS

Set credential

set cloudcredential sqscred secretaccesskey=awssecret

Add cloud configuration

add cloudconfiguration serviceName=SQS alias=sqsConfig

Set configuration

set cloudconfiguration conf1 alias=conf2

SQSClient APIs

SQSQueue createQueue(String queueName);
SQSQueue createQueue(String queueName, Map queueAttributes);
String getQueueUrl(String queueName);
Struct listQueues();
Struct listQueueTags(String queueUrl);
Struct purgeQueue(String queueUrl);
Struct deleteQueue(String queueUrl);
Struct sendMessage(String queueUrl, Map message);
Struct receiveMessage(String queueUrl, Map receiveMessageOptions);
Struct deleteMessage(String queueUrl, Map message);
Struct tagQueue(String queueUrl, Map tags);
Struct untagQueue(String queueUrl, Map tags);
Struct changeMessageVisibility(String queueUrl, Map message);
Struct setQueueAttributes(String queueUrl, Map queueAttributes);
Struct getQueueAttributes(String queueUrl, Map queueAttributes);
Struct changeMessageVisibilityBatch(String queueUrl, List<Map> messages);
Struct deleteMessageBatch(String queueUrl, List<Map> messages);
Struct sendMessageBatch(String queueUrl, List<Map> messages);
Struct listDeadLetterSourceQueues(String queueUrl);
Struct editTags(String queueUrl, Map tags);
Struct addPermission(String queueUrl, Map permission);
Struct removePermission(String queueUrl, String permissionLabel);
Struct listQueues(String queueNamePrefix);
String getQueueArn(String queueUrl);

SQSQueue APIs

public Struct listQueueTags();
public Struct purge();
Struct sendMessage(Map message);
Struct receiveMessage(Map receiveMessageOptions);
Struct deleteMessage(Map message);
Struct tag(Map tags);
Struct untag(Map tags);
Struct getAttributes(Map attributes);
Struct setAttributes(Map attributes);
Struct sendMessageBatch(List<Map> messages);
Struct deleteMessageBatch(List<Map> messages);
Struct changeMessageVisibilityBatch(List<Map> messages);
String getQueueUrl();
Struct listDeadLetterSourceQueues();
Struct editTags(Map tags);
Struct changeMessageVisibility(Map message);
Struct addPermission(Map permission);
Struct removePermission(String permissionLabel);
String getQueueArn();

Create a queue

This function creates a standard or a FIFO queue. While creating a queue, you must ensure the following:

If you do not specify the attribute FifoQueue, Amazon SQS creates a standard queue.
If you want to create a FIFO queue, you must use the convention, <QueueName>.fifo.
While creating a queue, if you do not provide a value for an attribute, the default values of the attribute are used to create the queue.

For more information, see CreateQueue.

Syntax

createQueue(String queueName, Struct queueAttributes)

Parameters

Parameter	Description	Type	Required
queueName	Name of the queue. If you want to create a FIFO queue, the queue name must end with the .fifo suffix. Queue names are case-sensitive.	String	Yes
queueAttributes	Struct of strings containing the following attributes: DelaySeconds: The time, in seconds, for which the delivery of all messages in the queue is delayed. Valid range: 0-900. Default: 0. MaximumMessageSize: Specifies the size in bytes a message can contain before Amazon SQS rejects it. Valid values: 1024 bytes (1 KB) - 262144 bytes (256 KB). Default: 262144 (256 KB). MessageRetentionPeriod: The time, in seconds, for which a message is retained in a queue. Valid values: 60-1209600. Default: 345600 Policy: The policy associated with the queue. For more information, see AWS policies. ReceiveMessageWaitTimeSeconds: The time, in seconds, for which the ReceiveMessage API waits for a message to arrive. Valid values:0-20. Default: 0. RedrivePolicy: The string that includes the parameters for the dead-letter queue. For more information about redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues. Valid value are: deadLetterTargetArn maxReceiveCount VisibilityTimeout: The visibility timeout for the queue, in seconds. Valid values: 0-43200. Default: 30. For more information about the visibility timeout, see Visibility Timeout. Server Side Encryption-related attributes: KmsMasterKeyId: The ID of an AWS-managed customer master key (CMK) KmsDataKeyReusePeriodSeconds: The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. FIFO-related attributes: FifoQueue: If true, creates a FIFO queue. For more information, see SQS Fifo queues. ContentBasedDeduplication: If true, enables content-based deduplication. Note: You cannot change the queue from Standard to FIFO queue and vice-versa.	Struct	No

For more information, see createQueue parameters.

Example

Standard queue

<cfscript> 
    cred={ 
        "credentialAlias" : "alias", 
        "vendorName" : "AWS", 
        "region" : "us-east-2", 
        "secretAccessKey" : "secret access", 
        "accessKeyId" : "access key" 
    } 
      
    conf={ 
        "serviceName"="SQS" 
    } 
      
    sqs=getCloudService(cred, conf) 
    queueName="QueueOne" 
     
    // standard queue 
    myQueue=sqs.createQueue(queueName) 
   try{ 
        myQueue=sqs.createQueue(queueName) 
        writeOutput("Standard queue created") 
    } 
    catch (any e){ 
        writeDump(e) 
    } 
</cfscript>

Standard queue with attributes

<cfscript> 
          
    sqs = getCloudService(application.awsCred, application.sqsConf) 
    queueName="MyQueue" 
    // Creates a new standard 
    setQueueAttributesMetadata = { 
        "attributes"={     
                       "VisibilityTimeout"="10", 
                       "MessageRetentionPeriod"="100", 
                       "MaximumMessageSize"="1024", 
                       "DelaySeconds"="10", 
                       "ReceiveMessageWaitTimeSeconds"="20" 
                     } 
    } 
    // standard queue 
    try{ 
        myQueue=sqs.createQueue(queueName,setQueueAttributesMetadata) 
        writeOutput("Queue with attributes created") 
    } 
    catch (any e){ 
        writeDump(e) 
    } 
</cfscript>

FIFO queue

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
    queueName="MyQueue.fifo" // A FIFO queue name must end with the .fifo suffix 
    // Creates FIFO queue 
    setQueueAttributesMetadata = { 
        "attributes"={     
                       "FifoQueue":"true", // This attribute must be True for a FIFO queue 
                       "VisibilityTimeout"="10", 
                       "MessageRetentionPeriod"="100", 
                       "MaximumMessageSize"="1024", 
                       "DelaySeconds"="10", 
                       "ReceiveMessageWaitTimeSeconds"="20" 
                     } 
    } 
    // FIFO queue 
    try{ 
        myQueue=sqs.createQueue(queueName,setQueueAttributesMetadata) 
        writeOutput("FIFO queue with attributes created") 
    } 
    catch (any e){ 
        writeDump(e) 
    } 
</cfscript>

Create a queue with SSE

Create a queue and enable Server-Side Encryption (SSE). SSE works with both standard and FIFO queues.

For better encryption, you can use the following:

Customer Master Key (CMK) ID: Key to encrypt the contents of the messages in SQS. For more information, see Data keys in SQS.
Customer Data Key Reuse Period: The time, in seconds, for which SQS reuses the data key to encrypt or decrypt messages. The value can be between 60-86400. For more information, see Understanding the Data Key Reuse Period.

Example

<cfscript> 
 sqs = getCloudService(application.awsCred, application.sqsConf); 
  
 //Use the sqs service object to create a queue using createQueue(). This method returns a queue object. 
 myQueue = sqs.createQueue("QueueWithSSE");  
 
 setQueueAttributesMetadata = {                                
  "attributes"={ 
     "KmsMasterKeyId"="arn:aws:kms:us-east-2:xxxxxxxxxxx:key/xxxxxxxxxxxx", 
     "KmsDataKeyReusePeriodSeconds"="120" 
     } 
 }; 
 setQueueAttributesResponse = myQueue.setAttributes(setQueueAttributesMetadata); 
 
 KmsMasterKeyIdVal = myQueue.getAttributes({ 
  "attributeNames"=["KmsMasterKeyId"] 
 }) 
 val = KmsMasterKeyIdVal["attributes"]; 
 writeoutput(val["KmsMasterKeyId"]); 
</cfscript>

List all queues

This function lists the number of queues in your AWS account.

For more information, see ListQueues.

Syntax

listQueues(queueNamePrefix)

Parameters

Parameter	Type	Required
queueNamePrefix	String	No

For more information, see parameters.

Note:

In the ListQueues method, the parameters maxResults and nextToken are not supported at present.

Example

<cfscript> 
       // Create a queue in SQS 
       // Get the getCloudService from the credentials and configuration we declared in Application.cfc 
       sqs = getCloudService(application.awsCred, application.sqsConf); 
       // Use the sqs service object to create a queue using createQueue().  
       // This method returns a queue object. 
       writeoutput("Create queue in AWS</br>"); 
       myQueue = sqs.createQueue("MyQueueWithAttrib") 
       writeoutput("Listing all the queues in AWS<br>") 
       writeDump(sqs.listQueues().queueUrls) 
       writeOutput("The number of queues in the region is:") 
       queueCount= ArrayLen(sqs.listQueues().queueUrls) 
       writeOutput(queueCount) 
</cfscript>

Get URL of a queue

Retrieve the URL of an Amazon SQS queue.

Syntax

getQueueUrl(queueName)

Parameters

Parameter	Description	Type	Required
queueName	The name of the queue whose URL you want to retrieve.	String	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqs=getCloudService(application.awsCred, application.sqsConf) 
    qURL=sqs.GetQueueUrl("BatchQueue") 
    writeDump(qURL) 
</cfscript>

Get ARN of a queue

Retrieve the Amazon Resource Names (ARNs) of an SQS queue.

Syntax

getQueueArn(String queueUrl)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue.	String	Yes

Example

<cfscript> 
    sqs=getCloudService(application.awsCred, application.sqsConf) 
    stdQueueObj = sqs.createQueue("stdQueueARN"); 
    queueARN = stdQueueObj.getQueueArn(); 
    writeoutput(queueARN) 
</cfscript>

Tag a queue

This function adds tags, for example, cost allocation, to a specified standard or a FIFO queue. While creating tags, you must ensure that:

The tags that you are adding are case-sensitive.
Any new tag with a key identical to that of an existing tag overwrites the existing tag.

For more information, see TagQueue.

Syntax

tagQueue(String queueUrl, Struct tags)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue which is to be tagged.	String	Yes
map	The tags to be added to the queue.	Struct	Yes

For more information, see tagQueue parameters.

Example

<cfscript> 
    sqs=getCloudService(application.awsCred, application.sqsConf) 
    // create a queue 
    myQueue=sqs.createQueue("QueueTags") 
    // get url of the queue 
    queueUrl=sqs.getQueueUrl("QueueTags") 
    writeOutput("The queue url is: " & queueUrl) 
             
    // create tags 
    queueTags={ 
        "tags"={ 
            "Product":"ColdFusion", 
            "Version":"2021", 
            "Build":"338001", 
            "Date":"2020/10/28", 
            "Location":"Adobe", 
            "Place":"Bangalore" 
        } 
    } 
  
    try{ 
        queueTagResponse=sqs.tagQueue(queueUrl,queueTags) 
        writeOutput(""&"Queue successfully tagged") 
        writeDump(queueTagResponse) 
    } 
    catch(any e){ 
        writeDump(e) 
    } 
</cfscript>

Using queue object

<cfscript> 
    sqs=getCloudService(application.awsCred, application.sqsConf) 
    // create a queue 
    myQueue=sqs.createQueue("QueueTags") 
    // get url of the queue 
    queueUrl=sqs.getQueueUrl("QueueTags") 
    writeOutput("The queue url is: " & queueUrl) 
             
    // create tags 
    queueTags={ 
        "tags"={ 
            "Product":"ColdFusion", 
            "Version":"2021", 
            "Build":"338001", 
            "Date":"2020/10/28", 
            "Location":"Adobe", 
            "Place":"Bangalore" 
        } 
    } 
  
    try{ 
        queueTagResponse=myQueue.tag(queueTags) 
        writeOutput(""&"Queue successfully tagged") 
        writeDump(queueTagResponse) 
    } 
    catch(any e){ 
        writeDump(e) 
    } 
</cfscript>

List tags of a queue

List all tags of a specified queue.

For more information, see ListQueueTags.

Syntax

listQueueTags(queueURL)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue.	String	Yes

For more information, see parameters.

Example

<cfscript> 
    sqs=getCloudService(application.awsCred, application.sqsConf) 
    // list queues 
    queueList=sqs.listQueues() 
    // get queue url of the queue created in the previous example 
    queueUrl=queueList.queueUrls[16] 
    tagList=sqs.listQueueTags(queueUrl) 
    writeOutput("List of tags in the queue:") 
    writeDump(tagList.tags) 
</cfscript>

The next example displays the list of tags in a queue by using the queue object. Here, a queue is created and a few tags are added to the queue.

<cfscript> 
   sqs=getCloudService(application.awsCred, application.sqsConf) 
   // create a queue 
   myQueue=sqs.createQueue("QueueTags") 
   // add tags to the queue 
   queueTags={ 
       "tags"={ 
           "Product":"ColdFusion", 
           "Version":"2021", 
           "Build":"338001", 
           "Date":"2020/10/28", 
           "Location":"Adobe" 
       } 
   } 
   myQueue.tag(queueTags) 
   // list tags 
   listTagResponse=myQueue.listQueueTags() 
   writeDump(listTagResponse) 
</cfscript>

Untag a queue

You can remove a tag from the queue using the tag's key.

For more information, see Untag a queue.

Syntax

untagQueue(String queueUrl, Struct tags)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue.	String	Yes
map	Array of tags to be removed from the specified queue.	Array	Yes

Example

<cfscript> 
        sqs = getCloudService(application.awsCred, application.sqsConf); 
 
  //writeoutput("Create queue in AWS<br>"); 
  myQueue = sqs.createQueue("Tagging_Queue"); 
 
  //writeoutput("set Tag queue attributes response"); 
  tagQueueMetadata = {"tags"= 
         {   
          "Product"="ColdFusion", 
          "Environment"="Production"           
         } 
       }; 
   
  // tag the queue 
  setQueueAttributesResponse = myQueue.tag(tagQueueMetadata); 
    
  writeoutput(#myQueue.ListQueueTags().tags["Product"]#);  
  writeoutput(#myQueue.ListQueueTags().tags["Environment"]#&"<br>");  
   
  untagQueueMetadata = {"tagKeys"=["Product","Environment"]}; 
  // untag the queue 
  untagQueueResponse = myQueue.untag(untagQueueMetadata); 
   
  try{ 
   writeoutput(#myQueue.ListQueueTags().tags["Environment"]#);  
  } 
  catch(any e){ 
   writeoutput(e.Message); 
  } 
</cfscript>

Delete a queue

Delete a queue in SQS. For more information, see Delete a queue.

You can delete a queue even when it is not empty. If you want to delete the messages in a queue but not the queue itself, you can purge the queue.

When you delete a queue, all messages in the queue are no longer available.

Syntax

deleteQueue(queueURL)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue.	String	Yes

Example

<cfscript> 
    // Get the getCloudService from the credentials and configuration we declared in Application.cfc 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
     
    // Use the sqs service object to create a queue using createQueue(). This method returns a queue object. 
    myQueue=sqs.createQueue("QueueForDeletion"); 
 
    // get queue Url 
    queueUrl=sqs.getQueueUrl("QueueForDeletion") 
 
    try{ 
        sqs.deleteQueue(queueUrl) 
        writeOutput("Queue deleted successfully.") 
    } 
    catch(any e){ 
        writeDump(e) 
    } 
</cfscript>

Purge a queue

If you do not want to delete a queue, but need to delete all the messages from it, you can purge the queue.

For more information, see Purge queue.

Syntax

purgeQueue(queueURL)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue.	String	Yes

Example

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf); 
  stdQueue = sqs.createQueue("PurgeMessageQueue");  
        stdQueueUrl = stdQueue.getQueueUrl(); 
  sendMessageMetadata = {  
   "messageBody"="This is a sample message",  
   "messageAttributes"={ 
    "timestamps"=dateTimeFormat(now()), 
    "geospatial_data"="San Francisco", 
    "signatures"="ADBE", 
    "identifiers"="ColdFusion" 
   } 
        } 
        // send message to the queue 
        sqs.sendMessage(stdQueueUrl,sendMessageMetadata) 
        try{ 
            sqs.purgeQueue(stdQueueUrl) 
            writeOutput("Queue purged successfully.") 
        } 
        catch(any e){ 
            writeDump(e) 
        } 
</cfscript>

Send message to a queue

You can send a message to the queue that exists by specifying your AWS credentials. For more information, see Send message in SQS.

Syntax

sendMessage(String queueUrl, Struct message)

Parameters

Parameter	Description	Type	Required
queueUrl	The URL of the queue to which a message is to be sent.	String	Yes
messageAttributes	Key-value pair of SQS message attributes. For more information, see SQS Message Attributes.	Struct	No
messageBody	The message to send to the queue.	String	Yes
messageDeduplicationId	Applies only to FIFO queues. This is a token for deduplication of messages.	String	No
messageGroupId	Applies only to FIFO queues. This is a tag for a specific message group.	String	No
messageSystemAttribute	Key-value pair of message system attributes. For more information, see SQS Message System Attributes.	Struct	No

For more information, see SendMessage request parameters.

Example

Example 1- Send message to a standard queue

<cfscript> 
    //Get the getCloudService from the credentials and configuration we declared in Application.cfc 
    sqs = getCloudService(application.awsCred, application.sqsConf); 
        
    // Use the sqs service object to create a queue using createQueue().  
    // This method returns a queue object. 
    myQueue = sqs.createQueue("SimpleMessageQueue"); 
     
    // Use the queue object to send a message to the queue. 
    message = {"messageBody"="This is a sample message."}; 
    sendMessageResponse = myQueue.sendMessage(message); 
    writedump(sendMessageResponse) 
    // display the status code 
    writeoutput(sendMessageResponse.sdkHttpResponse["statusCode"]); // 200 
</cfscript>

Example 2- Send message to a standard queue with additional parameters

<cfscript> 
  sqs = getCloudService(application.awsCred, application.sqsConf); 
  stdQueue = sqs.createQueue("sendMessage");  
                stdQueueUrl = stdQueue.getQueueUrl(); 
  sendMessageMetadata = {  
   "messageBody"="This is a sample message",  
   "messageAttributes"={ 
    "timestamps"="#dateTimeFormat(now())#", 
    "geospatial_data"="San Francisco", 
    "signatures"="ADBE", 
    "identifiers"="ColdFusion" 
   } 
  } 
        sendMessageResp = sqs.sendMessage(stdQueueUrl,sendMessageMetadata); 
        writeoutput(sendMessageResp.sdkHttpResponse.statusCode); // 200 
</cfscript>

Example 3- Send message to a FIFO queue

<cfscript> 
        try{ 
            sqs = getCloudService(application.awsCred, application.sqsConf); 
            queueAttributes = {                                
                "attributes" : {"FifoQueue" : "true"}  
            }   
            fifoQueue = sqs.createQueue("sendMessage.fifo", queueAttributes);  
            fifoQueueUrl = fifoQueue.getQueueUrl(); 
            sendMessageMetadata = {  
                "messageBody"="This is a sampe message",  
                "messageGroupId" ="12345", 
                "messageDeduplicationId" ="123456", 
                "messageAttributes"={ 
                    "timestamps"="#dateTimeFormat(now())#", 
                    "geospatial_data"="San Jose", 
                    "signatures"="ADBE", 
                    "identifiers"="ColdFusion" 
                } 
            }; 
        // send message 
            sendMessageResp = sqs.sendMessage(fifoQueueUrl,sendMessageMetadata); 
            writeoutput(sendMessageResp.sdkHttpResponse.statusCode); // 200 
        } 
        catch(any e){ 
            writeDump(e); 
        } 
 
 </cfscript>

Send message with attributes

You can include structured metadata (such as timestamps, geospatial data, signatures, and identifiers) with messages using message attributes.

For more information, see Send message with attributes.

Example

<cfscript> 
 
    // Get the getCloudService from the credentials and configuration we declared in Application.cfc 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
     
    // Use the sqs service object to create a queue using createQueue(). This method returns a queue object. 
    //writeoutput("Create queue in AWS<br>"); 
    myQueue = sqs.createQueue("MessageQueueWithAttribute"); 
     
    //Use the queue object to send a message to the queue. 
     
    sendMessageMetadata = {  
        "messageBody"="This is a sample message",  
        "messageAttributes"={ 
            "timestamps"=datetimeformat(now()), 
            "geospatial_data"="Bangalore", 
            "signatures"="ADBE", 
            "identifiers"="ColdFusion" 
        } 
    }; 
    sendMessageResponse = myQueue.sendMessage(sendMessageMetadata);   
      
    writeoutput("message successfully sent with attribute"); 
    writeDump(sendMessageResponse) 
</cfscript>

Receive message

After you send a message into a queue, you can retrieve it from the queue. When you request a message from a queue, you can't specify which message to get. Instead, you must specify the maximum number of messages (up to 10) that you want to get.

For more information, see Receive message in a queue.

Syntax

receiveMessage(String queueUrl, Map receiveMessageOptions)

Parameters

Parameter	Description	Type	Required
queueUrl	The URL of the queue from which messages are received.	String	Yes
messageAttributeNames	One of the following: ALL ApproximateFirstReceiveTimestamp ApproximateReceiveCount AWSTraceHeader SenderId SentTimestamp MessageDeduplicationId MessageGroupId SequenceNumber	Struct	No
maxNumberOfMessages	The maximum number of messages to return. Valid value 1-10.	Integer	No
receiveRequestAttemptId	ONLY FOR FIFO queues.	String	No
vVisibilityTimeout	The time for which messages remain hidden from retrieve requests.	Integer	No
waitTime	The duration for which a message waits before arriving in the queue.	Integer	No

For more information, see request parameters.

Example

Example 1- Receive a message in a FIFO queue

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf); 
    // define attribues for a FIFO queue 
    queueAttributes = {                                
        "attributes" : { 
            "FifoQueue" : "true" 
        }  
    }   
    fifoQueue = sqs.createQueue("sendMessage.fifo", queueAttributes);  
    fifoQueueUrl = fifoQueue.getQueueUrl(); 
    sendMessageMetadata = {  
        "messageBody"="This is a sample message",  
        "messageGroupId" ="12345", 
        "messageDeduplicationId" ="123456", 
        "messageAttributes"={ 
                "timestamps"="#dateTimeFormat(now())#", 
                "geospatial_data"="Bangalore", 
                "signatures"="SG", 
                "identifiers"="ColdFusion" 
        } 
    } 
    // send message 
    sqs.sendMessage(fifoQueueUrl,sendMessageMetadata) 
    // define receive message metadata 
    receiveMessageMetadata = { 
        "messageAttributeNames"="All" 
    } 
    try{ 
        receiveMessageResp = sqs.receiveMessage(fifoQueueUrl,receiveMessageMetadata) 
        writeOutput("Message received successfully") 
        writeDump(receiveMessageResp) 
    } 
    catch (any e){ 
        writeDump(e) 
    }              
</cfscript>

Example 2- Send messages in a standard queue

<cfscript> 
        sqs = getCloudService(application.awsCred, application.sqsConf); 
        // create a queue 
        stdQueue = sqs.createQueue("ReceiveMessageQueueNew");  
        // get queue url 
        stdQueueUrl = stdQueue.getQueueUrl(); 
  sendMessageMetadata = {  
   "messageBody"="This is a sample message",  
   "messageAttributes"={ 
    "timestamps"="#dateTimeFormat(now())#", 
    "geospatial_data"="San Jose", 
    "signatures"="SG", 
    "identifiers"="ColdFusion" 
   } 
  } 
        // send message 
        sqs.sendMessage(stdQueueUrl,sendMessageMetadata); 
        // define receive message metadata 
  receiveMessageMetadata = { 
            "messageAttributeNames"="All" 
        } 
        try{ 
            receiveMessageResp = sqs.receiveMessage(stdQueueUrl,receiveMessageMetadata) 
            writeOutput("Message received successfully") 
            writeDump(receiveMessageResp) 
            writeoutput(ArrayLen(receiveMessageResp.messages)>0) // TRUE 
        } 
        catch(any e){ 
            writeDump(e) 
        }     
</cfscript>

Delete a message

Delete a message from a queue. To select the message to delete, use the ReceiptHandle of the message.

For more information, see Delete message in a queue.

Syntax

deleteMessage(String queueUrl, Struct message)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue.	String	Yes
receiptHandle	The receipt handle associated with the message to delete.	String	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf); 
        // create a queue 
        stdQueue = sqs.createQueue("ReceiveMessageQueueNew");  
        // get queue url 
        stdQueueUrl = stdQueue.getQueueUrl(); 
  sendMessageMetadata = {  
   "messageBody"="This is a sample message",  
   "messageAttributes"={ 
    "timestamps"="#dateTimeFormat(now())#", 
    "geospatial_data"="San Jose", 
    "signatures"="SG", 
    "identifiers"="ColdFusion" 
   } 
  } 
        // send message 
        sqs.sendMessage(stdQueueUrl,sendMessageMetadata) 
        // receive message 
        // define receive message metadata 
  receiveMessageMetadata = { 
            "messageAttributeNames"="All" 
        } 
        receiveMessageResp=sqs.receiveMessage(stdQueueUrl,receiveMessageMetadata) 
         
        // get receipt handle 
        receiptHandle={ 
            "receiptHandle":receiveMessageResp.messages[1].receiptHandle 
        } 
        // delete message 
        try{ 
            deleteMessageResponse=sqs.deleteMessage(stdQueueUrl,receiptHandle) 
            writeOutput("Message deleted successfully") 
            writeDump(deleteMessageResponse) 
        } 
        catch(any e){ 
            writeDump(e) 
        } 
</cfscript>

Set attributes of a queue

Set the value of one or more queue attributes.

For more information, see Set queue attributes.

Syntax

setQueueAttributes(String queueUrl, Struct queueAttributes)

Parameters

Parameter	Description	Type	Required
queueURL	The URL of the queue whose attributes are to be set.	String	Yes
attribute	Key-value pair of the following: DelaySeconds MaximumMessageSize MessageRetentionPeriod Policy ReceiveMessageWaitTimeSeconds RedrivePolicy VisibilityTimeout Attributes for FIFO: ContentBasedDeduplication Attributes for Server-Side Encryption: KmsMasterKeyId KmsDataKeyReusePeriodSeconds	Struct	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
    // create a queue 
    sqs.createQueue("QueueAttributeDemo") 
    // get queue url 
    qURL=sqs.getQueueUrl("QueueAttributeDemo") 
    // define queue attribute metadata 
    setQueueAttributes = { 
        "attributes"={  
            "VisibilityTimeout"="10", 
            "MessageRetentionPeriod"="100", 
            "MaximumMessageSize"="1024", 
            "DelaySeconds"="10", 
            "ReceiveMessageWaitTimeSeconds"="20" 
        } 
    } 
    // set the queue attributes 
    try{ 
        queueAttributeResponse=sqs.setQueueAttributes(qURL,setQueueAttributes  
        writeOutput("Queue attributes set successfully") 
        writeDump(queueAttributeResponse) 
    } 
    catch(any e){ 
        writeOutput("Unable to set queue attribute") 
        writeDump(e) 
    } 
</cfscript>

Get attributes of a queue

Get the attributes of a specified queue.

For more information, see Get queue attributes.

Syntax

getQueueAttributes(String queueUrl, Struct queueAttributes)

Parameters

Parameter	Description	Type	Required
queueURL	The URL of the queue whose attributes are to be retrieved.	String	Yes
attributeNames	One of the following: All ApproximateNumberOfMessages ApproximateNumberOfMessagesDelayed ApproximateNumberOfMessagesNotVisible CreatedTimestamp DelaySeconds LastModifiedTimestamp MaximumMessageSize MessageRetentionPeriod Policy QueueArn ReceiveMessageWaitTimeSeconds RedrivePolicy VisibilityTimeout Attributes for SSE: KmsMasterKeyId KmsDataKeyReusePeriodSeconds Attributes for FIFO: FifoQueue ContentBasedDeduplication	Array	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
    // create a queue 
    sqs.createQueue("QueueGetAttributeDemo") 
    // get queue url 
    qURL=sqs.getQueueUrl("QueueGetAttributeDemo") 
    // define queue attribute metadata 
    setQueueAttributes = { 
        "attributes"={  
            "VisibilityTimeout"="10", 
            "MessageRetentionPeriod"="100", 
            "MaximumMessageSize"="1024", 
            "DelaySeconds"="10", 
            "ReceiveMessageWaitTimeSeconds"="20" 
        } 
    } 
    // set the queue attributes 
    sqs.setQueueAttributes(qURL,setQueueAttributes) 
    // define get attribute metadata 
    getQueueAttributesMetadata={  
        "attributeNames"=["All"] 
    } 
    try{ 
        getAttributeResponse=sqs.getQueueAttributes(qURL,getQueueAttributesMetadata) 
        writeOutput("Queue attributes are:") 
        writeDump(getAttributeResponse.attributes) 
    } 
    catch(any e){ 
        writeDump(e) 
    } 
</cfscript>

Change message visibility

Change the visibility timeout of a message in a queue. The default visibility timeout for a message is 30 seconds. The range is 0 seconds-12 hours.

For more information, see Change message visibility.

Syntax

changeMessageVisibility(String queueUrl, Struct message)

Parameters

Parameter	Description	Type	Required
queueURL	The URL of the queue whose message's visibility timeout is to be changed.	String	Yes
receiptHandle	The receipt handle of the message whose visibility timeout is to be changed.	String	Yes
visibilityTimeout	The new timeout value (0-43200)	Integer	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf); 
  stdQueue = sqs.createQueue("ChangeVisibilityDemo");  
        stdQueueUrl = stdQueue.getQueueUrl(); 
  sendMessageMetadata = {  
    "messageBody"="This is a sample message",  
    "messageAttributes"={ 
      "timestamps"="#dateTimeFormat(now())#", 
      "geospatial_data"="London", 
      "signatures"="CF", 
      "identifiers"="ColdFusion" 
    } 
  } 
  // send message to the queue 
  sqs.sendMessage(stdQueueUrl,sendMessageMetadata); 
  // define receive message metadata 
  receiveMessageMetadata = { 
   "messageAttributeNames"="All" 
  }; 
  // receive message 
        receiveMessageResp=sqs.receiveMessage(stdQueueUrl,receiveMessageMetadata); 
  msgReceiptHandle= receiveMessageResp.messages[1].receiptHandle; 
  // define change visibility metadata 
        changeVisibilityMetadata= { 
                "visibilityTimeout":"100", // 100 seconds 
                "receiptHandle":msgReceiptHandle 
  } 
  try{ 
   changeVisibiltyResponse= sqs.changeMessageVisibility(stdQueueUrl,changeVisibilityMetadata) 
   writeOutput("Message visibility timeout changed successfully") 
         writeDump(changeVisibiltyResponse) 
         writeoutput(changeVisibiltyResponse.sdkHttpResponse.statusCode) 
  } 
        catch(any e){ 
   writeDump(e) 
  } 
</cfscript>

Change message visibility batch

Change visibility timeout for multiple messages.

For more information, see Change message visibility match.

Syntax

changeMessageVisibilityBatch(String queueUrl, List<Map> messages)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue whose messages' visibility is to be changed.	String	Yes
changeMessageVisibilityBatchMetadata	Receipt handles of the messages for which the visibility timeout must be changed. For more information, see the array objects.	Array	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqsObj = getCloudService(application.awsCred, application.sqsConf);   
    stdQueueName = "stdBatchQueue" 
    // create the queue 
    stdQueueObj = sqsObj.createQueue(stdQueueName);   
    // get the queue url 
    stdQueueUrl = stdQueueObj.getQueueUrl() 
    // define the metadata for sending messages in a batch 
 sendMessageBatchMetadata =  
    [ 
        { 
            "id":"1", 
            "messageAttributes":{ 
                "name":"name1", 
                "type":"string", 
                "value":"value1" 
            }, 
            "messageBody":"This is the body of batch 1" 
        }, 
        { 
            "id":"2", 
            "messageAttributes":{ 
                "name":"name2", 
                "type":"number", 
                "value":24 
            }, 
            "messageBody":"This is the body of batch 2" 
        }, 
        { 
            "id":"3", 
            "messageAttributes":{ 
                "name":"name3", 
                "type":"string", 
                "value":"value2" 
            }, 
            "messageBody":"This is the body of batch 3" 
        } 
    ] 
    // send the messages in batch 
    sendMessageBatchResponse = sqsObj.sendMessageBatch(stdQueueUrl, sendMessageBatchMetadata); 
    // Receive the messages in the queue 
    receiveMessageMetadata = { 
        "messageAttributeNames"="All", 
        "maxNumberOfMessages"=5 
    } 
    receiveMessageResp = sqsObj.receiveMessage(stdQueueUrl,receiveMessageMetadata); 
    writeDump(receiveMessageResp) 
    //break; 
 
    // Define metadata for visibility change 
    changeMessageVisibilityBatchMetadata=[ 
        { 
            "id":receiveMessageResp.messages[1].messageId, 
            "receiptHandle":receiveMessageResp.messages[1].receiptHandle, 
            "visibilityTimeout":"20" 
        } 
        // { 
        //     "id":receiveMessageResp.messages[2].messageId, 
        //     "receiptHandle":receiveMessageResp.messages[2].receiptHandle, 
        //     "visibilityTimeout":"10" 
        // } 
    ] 
    // Change visiblity in batch 
    changeMessageVisibilityBatchResponse=sqsObj.changeMessageVisibilityBatch(stdQueueUrl,changeMessageVisibilityBatchMetadata) 
    writeDump(changeMessageVisibilityBatchResponse) 
</cfscript>

Send messages in batch

Send a batch of up to 10 messages to a specified queue. This is a batch version of the sendMessage API.

For more information, see SendMessageBatch.

Syntax

sendMessageBatch(String queueUrl, List<Map> messages)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue to which messages are to be sent in a batch.	String	Yes
sendMessageBatchMetadata	Array of SendMessageBatchRequestEntry objects.	Array	Yes

For more information, see request parameters.

Example

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
    // get queue url to which the message batch will be sent. 
    myQueueUrl=sqs.listQueues().queueUrls[1] 
     
    sendMessageBatchMetadata =  
    [ 
     { 
            "id":"1", 
            "messageAttributes":{ 
                "name":"name1", 
                "type":"string", 
                "value":"value1" 
            }, 
            "messageBody":"This is the body of batch 1" 
        }, 
        { 
            "id":"2", 
            "messageAttributes":{ 
                "name":"name2", 
                "type":"number", 
                "value":24 
            }, 
            "messageBody":"This is the body of batch 2" 
        } 
    ] 
    try{ 
        sendMessageBatchResponse = sqs.sendMessageBatch(myQueueUrl, sendMessageBatchMetadata) 
        writeOutput("Message batch sent successfully") 
        writeDump(sendMessageBatchResponse) 
        writeDump(sendMessageBatchResponse.successful) 
    } 
    catch (any e){ 
        writeDump(e) 
    } 
</cfscript>

Delete messages in a batch

Delete up to 10 messages in a queue. This function is the batch version of the deleteMessage API.

For more information, see Delete messages in a batch.

Syntax

deleteMessageBatch(String queueUrl, List<Map> messages)

Parameters

Parameter	Description	Type	Required
queueURL	The url of the queue whose messages are to be deleted.	String	Yes
deleteMessageBatchMetadata	List of receipt handles of the messages to be deleted. Array of DeleteMessageBatchRequestEntry objects.	Array	Yes

For more information, see request parameters.

Example

Example 1- Standard queue

<cfscript> 
    sqs = getCloudService(application.awsCred, application.sqsConf) 
    // create a queue 
    myQueue = sqs.createQueue("SendDeleteBatchMessage") 
    // get queue url 
    qURL=myQueue.getQueueUrl() 
    // upoad a file 
    myImage = "image.PNG" 
    sendMessageBatchMetadata = [ 
     {"id"="1", "messageBody"="Delete Batch Message 1", "messageAttributes"={"date"=datetimeformat(now()), "myAtt12"="#toBinary(toBase64(myImage))#"}}, 
        {"id"="2", "messageBody"="Delete Batch Message 2", "messageAttributes"={"send_date"=datetimeformat(now())}} 
    ]; 
    sendMessageResponse = sqs.sendMessageBatch(qURL, sendMessageBatchMetadata) 
    // writeDump(sendMessageResponse) 
    // break; 
    // receive messages in the queue 
    receiveMessageMetadata = {"messageAttributeNames"="All","maxNumberOfMessages"=2} 
    receiveMessageResponse = sqs.receiveMessage(qURL,receiveMessageMetadata);  
    writeDump(receiveMessageResponse) 
    //break; 
    writeoutput("Delete message batch response"); 
 msgReceiptHandle1= receiveMessageResponse.messages[1].receiptHandle; 
    msgReceiptHandle2= receiveMessageResponse.messages[2].receiptHandle; 
    deleteMessageBatchMetadata = [ 
     {"id"="1", "receiptHandle"="#msgReceiptHandle1#"}, 
     {"id"="2", "receiptHandle"="#msgReceiptHandle2#"} 
 ]; 
 deleteMessageResponse = sqs.deleteMessageBatch(qURL,deleteMessageBatchMetadata); 
 writeDump(deleteMessageResponse) 
</cfscript>

Example 2- FIFO queue

<cfscript> 
        try{ 
            sqs = getCloudService(application.awsCred, application.sqsConf); 
            queueAttributes = {                                
                                    "attributes" : {"FifoQueue" : "true"}  
                            }   
            fifoQueue = sqs.createQueue("sendBatchMessage.fifo", queueAttributes);  
            fifoQueueUrl = fifoQueue.getQueueUrl(); 
            sendMessageBatchMetadata = [ 
                                     {"id"="1", "messageBody"="First Batch message","messageGroupId" ="720","messageDeduplicationId" ="23", "messageAttributes"={"myAtt1"="First"}}, 
                                     {"id"="2", "messageBody"="Second Batch Message","messageGroupId" ="008","messageDeduplicationId" ="45",  "messageAttributes"={"myAtt21"="Second"}} 
                                      ]; 
 
            sendMessageResp = sqs.sendMessageBatch(fifoQueueUrl,sendMessageBatchMetadata); 
            writeoutput(sendMessageResp.sdkHttpResponse.statusCode); 
            receiveMessageMetadata = {"messageAttributeNames"="All","maxNumberOfMessages"=2}; 
            receiveMessageResp = sqs.receiveMessage(fifoQueueUrl,receiveMessageMetadata);             
            msgReceiptHandle1= receiveMessageResp.messages[1].receiptHandle; 
            msgReceiptHandle2= receiveMessageResp.messages[2].receiptHandle; 
            deleteMessageBatchMetadata = [ 
                                {"id"="1", "receiptHandle"="#msgReceiptHandle1#"}, 
                                {"id"="2", "receiptHandle"="#msgReceiptHandle2#"} 
                               ]; 
            deleteMsgReps= sqs.deleteMessageBatch(fifoQueueUrl,deleteMessageBatchMetadata); 
            writeoutput(deleteMsgReps.sdkHttpResponse.statusCode); 
        } 
        catch(any e){ 
            writeDump(e); 
        }

Add permission

Add permission to a queue for for a user, service, or account, whose permissions are defined in a policy.

When you create a queue, you have full control of the queue. You can then grant or deny permissions to the queue.

For more information, see Add permission.

Syntax

addPermission(String queueUrl, Struct permission)

Parameters

Parameter	Description	Type	Required
Actions	The action the client wants to allow for the specified principal. Valid values are: SendMessage DeleteMessage ChangeMessageVisibility	Array	Yes
awsAccountIds	The AWS account number of the principal who is given permission.	Array	Yes
Label	The unique id of the permission to be set.	String	Yes
queueUrl	The URL of the queue.	String	Yes

For more information, see request parameters.

Example

<cfscript> 
 sqs = getCloudService(application.awsCred, application.sqsConf);  
 // create queue 
 sqs.createQueue("AddPermission"); 
 // get url of the queue 
 queueUrl=sqs.getQueueUrl("AddPermission") 
 // define permission struct 
 addPermissionStruct={ 
  "actions" = ["SendMessage"], // Send message action granted 
  "awsAccountIds" = ["xxxxxxxxxxxxx"], 
  "label" = "label-cf-sqs" 
 } 
 try{ 
  addPermissionResp = sqs.addPermission(queueUrl,addPermissionStruct) 
  writeOutput("Permission added successfully") 
  writeDump(addPermissionResp) 
 } 
 catch (any e){ 
  writeDump(e) 
 }   
</cfscript>

Remove permission

Revoke any permissions in the policy of the queue that matches the label, which was used to add permission in the first place.

For more information, see Remove permission.

Syntax

removePermission(String queueUrl, String permissionLabel)

Parameters

Parameters	Description	Type	Required
queueURL	The url of the queue from which you want to remove the permission.	String	Yes
permissionLabel	The unique Id of the permission to remove.	String	Yes

For more information, see request parameters.

Example

<cfscript> 
        sqs = getCloudService(application.awsCred, application.sqsConf);  
 // create queue 
 sqs.createQueue("RemovePermission"); 
 // get url of the queue 
 queueUrl=sqs.getQueueUrl("AddPermission") 
 // define permission struct 
 addPermissionStruct={ 
  "actions" = ["SendMessage"], // Send message action granted 
  "awsAccountIds" = ["xxxxxxxxxxxxx"], 
  "label" = "label-cf-sqs" 
 } 
 sqs.addPermission(queueUrl,addPermissionStruct) 
 // remove permission struct 
 labelToRemove="label-cf-sqs" 
 try{ 
  removePermissionResp = sqs.removePermission(queueUrl,labelToRemove) 
  writeOutput("Permission removed successfully") 
  writeDump(removePermissionResp) 
 } 
 catch(any e){ 
  writeDump(e) 
 } 
</cfscript>

List Dead Letter Source Queues

In SQS, using a dead letter queue, you can automatically transfer messages, that have exceeded the maximum number of receiving messages, to the dead letter queue.

Also a dead letter queue stores messages when the queue does not exist or the queue or message length have exceeded a set value.

In a nutshell, a dead letter queue handles failed messages so that you can letter debug a faulty message.

You can set a redrive policy on a queue where you can define that if a message is not successfully processed by a consumer within a specified number of times, SQS will send that message to a dead letter queue.

For more information, see Amazon dead letter queues.

The listDeadLetterSourceQueues API returns a list of your queues that have the RedrivePolicy attribute configured with a dead-letter queue.

For more information, see ListDeadLetterSourceQueues.

Syntax

listDeadLetterSourceQueues(queueUrl)

Parameters

Parameter	Description	Type	Required
queueURL	The URL of a dead-letter queue.	String	Yes

For more information, see request parameters.

Example

<cfscript> 
        sqs = getCloudService(application.awsCred, application.sqsConf); 
  setQueueAttributesMetadata = { 
   "attributes"={ 
   "FifoQueue" : "true" 
   } 
        } 
        // create FIFO queues 
  myQueue = sqs.createQueue("FIFOQueue4DL.fifo",setQueueAttributesMetadata);  
  deadLetterQueue = sqs.createQueue("dead_Letter_Queue.fifo",setQueueAttributesMetadata);   
  queueUrl = myQueue.getQueueUrl(); 
  getQueueAttributesMetadata = {"attributeNames":["All"]}; 
 
  deadLetterQueueARN = deadLetterQueue.getAttributes(#getQueueAttributesMetadata#).attributes["QueueArn"]; 
  redrivePolicy = { 
   "maxReceiveCount" = 2, 
   "deadLetterTargetArn" = "#deadLetterQueueARN#" 
  } 
  setQueueAttributesMetadata = { 
   "attributes"={ 
   "RedrivePolicy" = "#serializeJson(redrivePolicy)#" 
      } 
  }; 
  setQueueAttributesResponse = myQueue.setAttributes(setQueueAttributesMetadata);  
  getQueueAttributesMetadata = {"attributeNames"=["All"]}; 
  getQueueAttributesResponse = myQueue.getAttributes(getQueueAttributesMetadata); 
  redrivePolicyVal= #deserializeJson(getQueueAttributesResponse.attributes["RedrivePolicy"])#; 
  writeoutput(#redrivePolicyVal.deadLetterTargetArn#); 
</cfscript>

Configure Long Polling with Queue

SQS is a poll-based service, where applications poll messages from SQS queue. If you poll your SQS queue and it returns an empty response, you are still charged. The default polling for SQS is short polling, where the response is sent without any wait time even if the queue is empty or updated with new messages.

Long polling eliminates the number of empty responses and false empty responses, when messages are available, but aren’t included in a response.

For more information, see Long polling for SQS.

<cfscript> 
  sqs = getCloudService(application.awsCred, application.sqsConf);  
   
  myQueue = sqs.createQueue("longPolling");   
  writeoutput(myQueue.getQueueUrl()); 
  queueUrl = myQueue.getQueueUrl(); 
   
  setQueueAttributesMetadata = { 
   "attributes"={ 
   "ReceiveMessageWaitTimeSeconds"="20" 
   } 
  }; 
  setQueueAttributesResponse = myQueue.setAttributes(setQueueAttributesMetadata);  
 
  longPollingVal=myQueue.getAttributes({"attributeNames"=["ReceiveMessageWaitTimeSeconds"]}); 
  writeoutput(longPollingVal.attributes["ReceiveMessageWaitTimeSeconds"]); 
   
 </cfscript>

Adobe

Get help faster and easier

New user?

Adobe MAX
The Creativity Conference

Oct 14–16 Miami Beach and online

Adobe MAX

The Creativity Conference

Oct 14–16 Miami Beach and online

Adobe MAX
The Creativity Conference

Oct 14–16 Miami Beach and online

Adobe MAX

The Creativity Conference

Oct 14–16 Miami Beach and online